Metal lever with plastic handle (C)
Remove coffee grounds from the stainless steel bowls (
C2
and
C3
) after each use. Rinse
the funnel
C1
thoroughly under running water. Wash the filters (
C2
and
C3
) in warm water
with detergent and then rinse with clean water. Wipe the plastic handle with a damp cloth.
Then let everything dry.
Drip tray (E)
Pour the drip tray as required. Wash parts
E
and
E1
with a conventional dishwashing
detergent, rinse with clean water and allow to dry.
Steam nozzle (A3)
The nozzle must be cleaned after each use. You can do so by activating it and immersing
it in a container of clean water and then wiping it with a dry tissue. Also, clean it regularly
by removing the
A4
and
A5
parts. Rinse the components under running water, let them dry
and proceed in reverse order to assemble and place them back. If necessary, clean the
openings with a long narrow object (toothpick, needle, etc.).
Descaling
If the coffee preparation time is significantly prolonged, the coffee machine‘s water system
must be cleaned of lime and mineral deposits (scale). Said deposits may be removed with
a water solution with a formulation intended for this purpose (e.g.
ETA518000201
). Always
follow the manufacturer‘s instructions for the product, which are usually on the packaging.
Depending on the water hardness and the frequency of use of the coffee machine,
remove scale regularly
(recommended at least once a month). The procedure is as
follows:
1.
Fill tank
D
with the prepared cleaning solution.
2.
Position lever
C
correctly.
3.
Place a suitable container under the coffee spout.
4.
After the coffee machine has warmed up, use the
B2
/
B3
button to let the cleaning
solution flow through the inside of the coffee machine (approx. 1/2 of the reservoir
volume
D
). Use the rest of the solution to clean the steam nozzle using the hot water
function.
5.
When container
D
is empty, rinse it with clean water. Then fill
D
-tank only with clean
water and repeat the procedure. This will thoroughly flush out the inside of the coffee
machine from the cleaning solution.
Expert service must do the large maintenance or to intervene into inside parts of
the appliance! Non-observance of the instructions of the manufacturer cancels the
right for guarantee repair!
If you are unable to fix the problem, or if you need any further
information about the appliance or service centres, please contact your distributor.
VI. ENVIRONMENT
Printed signs of materials used for manufacture, packing, components and accessories,
as well as their recycling, are on all the pieces if their dimensions enable it. The symbols
on the product or in the accompanying documentation mean that the used electric or
electronic products must not be disposed together with municipal wastes. Please, hand
them over to the collection points designed for their correct disposal, where they will be
accepted free of charge.
GB
26 / 43
