Connect the power cord
B6
to the power supply. Press button
B1
, you will hear a sound
signal (beep), the power supply connection indicator will turn on and the steam indicator
in button
A2
will be lit intermittently (flashing). Press the button with an appropriate steam
level indicator (
B1
,
A2
) on the boiler
B
or the iron
A
according to the selected material and
the level set on steam. The button indicator
A2
will be lit intermittently (flash) which signals
the generation of steam. As soon as the indicator is lit permanently, the steam has been
formed in the boiler
B
. Grab the handle
A4
of the iron, press and hold button (control)
A3
to generate steam. For easier use, the
A3
button may be locked by shifting the locking
button downwards. To deactivate (unlock) the locking button, shift it the other way round
.
The flow of steam stops when the button (control)
A3
is released.
Warning
– For all normal ironing the ECO adjustment of the steam amount is recommended.
Only on ironing the linen fabric, thick cotton and similar fabrics the adjustment of the
steam amount to maximum value is recommended.
–
When ironing, make sure that the steam inlet hose
A5
is not wrung, pinched or broken.
–
If you do not use the steam for several minutes, direct the iron away from the clothing
and press the steam button (control)
A3
several times to remove condensed water in
the steam system.
–
The pump will turn on during the steam generation, which is accompanied by
a characteristic sound. It is completely normal and does not represent a reason for
a sales return.
–
When using starch, pour it on the wrong side of the ironed surface and increase the
steam generation.
–
When ironing thick fabric, increase the steam generation; when ironing at low
temperature, select the low steam generation.
–
You can also rest the iron in a “vertical” position but you have to make sure that it rests
on a stable and flat surface to prevent the iron from falling accidentally.
– Do not use your bare hand as a supporting surface when you steam.
!
Safety electronics
(AUTO STOP)
The safety electronics ensures switching OFF the appliance heating after 10 minutes of
use. Function of safety electronics is signalled by flashing of indicator lamp and 6 beeps
The iron is restarted automatically, when the ironing is resumed and is press button
A3
or
B1
,
A2
according to the required steam level.
Storage
When you finish ironing, turn the appliance off by holding button
B1
and disconnect the
power cord from the electric socket. Then drain the water from the tank, or let it evaporate,
and let the iron cool down. The power cord
B6
and the steam inlet hose
A5
into the storage
area up
B7
(Fig. 6). Place the iron into the resting position. Store the appliance after cleaning
in a dry, dust-free and safe place, out of the reach of children and incompetent persons.
IV. MAINTENANCE
Before every maintenance, unplug the iron from power supply by taking the fork of
the power cord out of the socket! Do not use rough and aggressive detergents (e.g.
sharp objects, peelers, pot scourers, caustic agents for cleaning or other solvents).
27
GB
/ 59
