– For the ironing plate to remain smooth, protect it from direct contact with hard objects
(e.g.
zip fasteners, buttons, snap buttons, decorative objects
). To put the iron aside,
use the resting plate of the boiler that is equipped with anti-slip pads and designed to
withstand very high temperatures.
Removing / attaching the
steam iron
(fig. 3, 4)
Removing the steam iron
A
– by pressing button
B4
, the arrest will be released and it
is then possible to remove the steam iron
from the resting surface
B5
.
Insert the steam
iron into the resting surface in a reverse way and press the lock button pull
B3
, which is
accompanied by characteristic sound (clicking).
Ironing without steaming (dry ironing)
Thanks to the OptiCare technology, the system has one temperature setting (135 - 165
o
C)
which is perfectly suitable for all garments. Connect the power cord plug
B6
to the power
supply, press button
B1
; you will hear a sound signal (beep), the power supply connection
indicator will turn on and the indicator in button
A2
will be lit intermittently (flashing). Place
the iron in the resting position. Once the temperature setting is reached, the control light
A2
is permanently on.
WARNING
–
During ironing the thermostat will cycle, which is accompanied by characteristic sound
(clicking). This is normal situation and does not form the reason for warranty claim
related to the appliance.
!
Recommendation
When the temperature is increased from the cold state we recommend waiting for
a while due to stabilization of the ironing plate
A1
temperature.
i
Filling up the tank with water
Press the lock button
C3
, pull the water tank
C
out (Fig. 2) and take off the cover of the
water funnel
C1
. Pour clean tap water into the tank up to the line (MAX 1.5 L) and close the
funnel cap with a snap. Insert the tank into the boiler in a reverse way, end-to-end which is
accompanied by characteristic sound (clicking).
We recommend diluting hard tap water with distilled water. You can obtain information on
the water hardness from the water supply network manager, or at a hygienic station which
is accompanied by characteristic sound (clicking). We recommend filling the iron according
to the following ratio when the water hardness is >15 °N:
Water hardness
Ratio of tap water : distilled water
(pH = 7)
medium
2 : 1
hard
1 : 1
very hard
1 : 2
When the indicator (empty tank) is lit and you hear a sound signal, it is required to fill
the tank
C
with water. Turn the boiler
B1
off and disconnect the power cord
B6
from the
electric socket. When filling up the tank with water, follow the instructions above.
Steam ironing / Vertical steaming
(fig. 5)
The iron can be used as well for steaming hanging clothes.
26
GB
/ 59
