1
A1
A3
A6
A4
A5
A3
A2
CLICK
CLICK
CLICK
1
2
1
A7
A7
A
III. PREPARATION FOR USE
Remove all the packing material and take out the toaster. Remove all possible adhesion
foils, stick-on labels or paper from the toaster. After the first putting into operation and let
an open toaster in operation with a window open for about 10 minutes, then turn it off and
let it cool down. After the appliance cools down, swipe the parts that come in contact with
food with a soft, wet and clean cloth or a paper towel.
Changing the boards
Press button
A7
and remove board
A5
by tilting (Picture 1). Insert the protrusions on the
board to the two openings in the coating and secure by tilting (you will hear a click sound).
IV
. INSTRUCTIONS FOR USE
Place the assembled appliance on a flat, steady, smooth and clean surface at a height
of at least 85 cm, out of the reach of children (see sec.
I. SAFETY WARNINGS
). Leave
enough space to ensure sufficient ventilation. To choose the desired replaceable plates
take out those which are placed in the appliance (unless you want to use those). Plug the
power cord connector
A6
to an electric socket. The socket must be readily accessible so
that the appliance could be easily disconnected from the mains in case of danger. Now
the appliance is ready for use. A red and green signaling light
A2
will come on, signaling
connection to electric power supply. The plates will start to heat. When the operating
temperature is reached, the green signaling light
A2
will come OFF.
EN
16
/ 35
Summary of Contents for Sorento Plus 5151
Page 40: ...e 58 2019 DATE 03 01 2020...
