42
www.eta.co.at
Opening the text menu
User interface
Example: Displaying the boiler counters
Tap the [Boiler] button to open the "Boiler"
function block.
From the overview screen, press the
button to
go to the text menu.
The boiler text menu appears.
Tap the [Counters] line. The submenu opens and
the boiler counters are displayed.
Press the
button to return to the overview.
Function block text menus
There is a "text menu" for each function block. This
view shows the current parameter settings. It also
allows the user to make changes.
Opening the text menu
Select the desired function block, e.g. by tapping
[Boiler]. Next, change the view to "text menu" by
pressing the
button.
The text menu for the selected function block
appears. The individual parameters for the selected
function block are displayed.
Lines preceded by
have a submenu, which can
be opened by tapping the line. The submenu can
be closed again by tapping the upper-level line
that is marked with
.
Modifying parameters
It is possible to modify certain parameters in
order to adapt the heating to your needs. Tap
these parameters to select them. The [Value] field
changes and the [Change value] button appears.
Change
the parameters by
double-tapping
on
the line, or
select the line and press the [Change
value] button.
or
2x
In case of doubt, consult an expert before
making any changes.
Only modify parameters if you know what their
function is. Read through the corresponding
section of the user manual before making changes.
If the explanation of the relevant function given
in the manual is not sufficient for your purposes,
confer with an expert.
Opening the text menu