eta Kvadro, Instructions For Use Manual

Page: 15 / 32

II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A1 – hinged lid A4 – lock (locking clip)
A2 – signaling lights A5 – plates
A3 – handle A6 – power cord
1
A1
A3
A6
A4
A5
A2
III. PREPARATION FOR USE
Remove all the packing material and take out the toaster. Remove all possible adhesion
foils, stick-on labels or paper from the toaster. After the first putting into operation and let
an „open“ toaster in operation with a window open for about 10 minutes, then turn it off and
let it cool down.
IV. INSTRUCTIONS FOR USE
Place the assembled appliance on a flat, steady, smooth and clean surface at a height
of at least 85 cm, out of the reach of children. Leave enough space to ensure sufficient
ventilation.
Plug the power cord connector A6 to an electric socket. The socket must be readily
accessible so that the appliance could be easily disconnected from the mains in case of
danger. Now the appliance is ready for use.
15
GB
/ 27