eta HACK 130-200, Installation, Configuration And Maintenance

Page: 28 / 48

28 www.eta.co.at
Mounting the conveyor pipe Concluding activities
11.5 Mounting the conveyor pipe
The customer is to mount the conveyor pipe between
transfer coupling and pellet suction system.
Position the welding flanges supplied for
maintenance work in front of ascending and
descending sections.
11.6 Mounting the return hose
The customer mounts the conveyor pipe between
transfer coupling and pellet suction system.
Conveyor pipe Value
Welded steel pipes DN 80
Minimum inside diameter 80 mm
Maximum outside diameter 88.9 mm
Maximum length 35 m
Maximum height difference 5 m
Maximum number of bends 7
Minimum radius of bends
400 mm
(EN 10253-1)
Return pipe Value
Welded steel pipes or PU
hoses
DN 100
(smooth interior
surface)
Temperature range -40 ° C to 100 ° C
Maximum length 35 m
Maximum height difference 5 m
Minimum radius of bends 300 mm
Earthing Yes
Segmentation possible Yes