eta Ambo, Instructions For Use Manual

Page: 33 / 56

Remove the tooth wheel
F1
from the spiral feeder. Put new tooth wheel on the axe of the
spiral feeder and tighten it properly with the bolt (Fig. 9).
V. ENVIRONMENT
If the dimensions allow, there are marks of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at the special collection places where they will be accepted free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authority or at a collection site. Fines can be imposed for improper disposal of this
type of waste in agreement with the national regulations.
If the appliance is to be put out of operation, after disconnecting it from power supply we
recommend its cutoff and in this way it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service! Failure to comply with
the instructions of the manufacturer will lead to expiration of the right to guarantee
repair!
VI. TECHNICAL DATA
Voltage (V) Shown on the type label of the appliance
Input power (W) Shown on the type label of the appliance
Weight (kg) approx. 4,5
Size of the product (mm) 360 x 360 x 180
Protection class of the appliance II.
Input in off mode is < 0,50 W.
The product has received ES declaration of conformity according to Act as amended.
The product matches the requirements of the below statutory order as amended.
– Committee Regulation No. 2006/95/ES as amended, setting the technical requirements
of the electrical appliance as low.
– Committee Regulation No. 2004/108/ES as amended, setting the technical requirements
of products in terms of their electromagnetic compatibility.
The product is in conformity with the European Parliament and European Committee
Regulation No. 1935/2004/ES re. Materials and objects designed for contact with food.
The manufacturer reserves the right for any insignificant deviations from the standard
finished product which do not have any effect on the functioning of the product.
NOTICE: maintain the direction for inserting the grinding disc!
33
GB
/ 53