EN - 53
EN
Scheduled cleaning setting
Warning
–
When setting the scheduled cleaning, make sure that the vacuum cleaner is in standby mode.
–
When setting the current time, always point the remote control at the vacuum cleaner
and keep a maximum distance of 3 m.
1. Aim the remote control towards the vacuum cleaner and press the
F4
button. The value
for setting the hour in the first line of the display starts flashing.
2. You can now use the
F3
buttons (up and down arrows) to set the scheduled cleaning
hour value. Use the
F3
buttons (left and right arrows) to switch between setting the
hours and minutes.
3. Switch the setting for minutes (the minute value will flash) and set the minute value of
the scheduled cleaning (the minute setting is in 15-minute increments).
4. To confirm and save the set scheduled cleaning time, press the button
F4
. The set value
will be permanently lit on the display.
Note
Scheduled cleaning can be deactivated by: Switching off the robot vacuum by pressing
A6
main switch button or set the "00:00". value on the display.
5.6 USING THE MOPING ATTACHMENT
1. Attach the
C4
mop to the lower part of the moping
attachment correctly. Soak and wring the mop before use.
Summary of Contents for 4237
Page 128: ...e 44 2021 DATE 12 07 2021...