eta 4237, User Manual

Page: 50 / 128

EN - 50
EN
Note
If you use the vacuum cleaner together with the charging station and the scheduled
cleaning function, leave the main switch in the "I" position at all times (ON).
5.2 BATTERY CHARGING
1. Check that the charging station is properly connected to the mains. (light D1 must be on).
2. Place the vacuum cleaner near the charging station and press the F9 button on the
remote control. If the battery is too low, place directly and correctly the vacuum cleaner
on the charging station.
Set power Running Time *
MIN Approx. 120 minutes
NORMAL Approx. 90 minutes
MAX Approx. 60 minutes
* Note: The stated operating times are based on ETA‘s internal testing
and only apply to a new and fully charged battery. Depending on the
age and wear of the battery, the operating time decreases.
Remarks
– The vacuum cleaner can be charged by directly connecting adapter E to power
connector A7 . After charging, it is necessary to disconnect the power adapter from
the A7 connector of the vacuum cleaner.
– The standard charging time is approx. 6 hours.
– After cleaning, the vacuum cleaner will automatically search for the charging station.
If the device did not returned to the charging dock (e.g. due to obstacles) and the
battery level becomes critical, it will be switched off automatically.
– The "ETA SMART" application makes it easy to find out the battery status. The
application can also be sent back to the charging station at any time.
5.3 START / STANDBY / SLEEP MODE
Start (Cleaning): the indicator light is green.
Standby mode (Pause): the indicator light flashes.
Sleep mode: the indicator light is off.
Start (Cleaning)
1. Check that the main switch A6 is in the "I" position.
2. By pressing the button on A14 or using the remote control F start the vacuum cleaner.
Standby mode (Pause)
Press the A14 button on the vacuum cleaner or the F2 button on the remote control F to
interrupt the ongoing cleaning and put the vacuum cleaner in standby mode.