–
After finishing work and before cleaning, always switch off the appliance and
disconnect it from power supply by taking the power cord connector out of the
electric socket.
–
Never immerse the drive unit into water and do not wash it in running water!
–
Do not plug or unplug the appliance from a socket with wet hands and do not pull
the power cord!
– Do not place any objects on the appliance.
– Do not place any objects on the appliance.
–
Never leave the appliance unsupervised and check it during the whole time
of preparing meals!
– The appliance is equipped with thermal safety fuse which disconnects current supply
incase of engine overloading. If it occurs, unplug the appliance and let the appliance
getcooled at least 10 minutes.
–
CAUTION
: Do not use the appliance with a program, time switch or any other part
that turns the appliance on automatically as there is a risk of fire if the appliance is not
covered or placed properly.
– It is not allowed to modify the surface of the appliance in any way (e.g.
using
a selfadhesive wallpaper, foils
, etc.).
– Do not insert the appliance into any body holes.
– Use the appliance only with original accessories from the manufacturer.
– Use the appliance only for the purpose it is intended for as specified in this manual.
Never use the appliance for any other purpose.
–
WARNING
: There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– The manufacturer is not responsible for damage and injuries caused by improper use
of the appliance and the accessories (e.g.
food deterioration, injury, cutting
) and its
guarantee for the appliance does not apply in situations when the safety warnings above
are not complied with.
USE OF THE APPLIANCE:
–
To press the ingredients to the knife, use the attached pusher only! It has been
designed especially for that purpose.
–
Every time before the propulsion unit is switched on, the container needs to be
attached properly and the lid needs to be placed appropriately so as to close the
container. The safety plug or the pusher needs to be inserted in the lid.
–
Never remove or attach the container while the propulsion unit is in operation.
Thus you avoid the risk of injury or damage to the appliance.
–
The appliance must not be used in damp or wet environment and in any
environment with the danger of fire or explosion
(spaces where chemicals, fuels, oils,
gases, paints and other flammable or volatile materials are stored).
–
Maximum time of processing is
6
min. After that, keep the break for approx.
10
min
necessary for the motor unit to cool off.
– Correctly placing the bowl on the appliance will release the safety lock and the appliance
may be turned on.
–
The container is not designed for keeping and storing food. Put the food in another
container suitable for storage after mixing.
– Do not fill the container with water or other liquid to maximum. When in operation, the
water could overflow and get into the appliance.
25
GB
/ 53
