– Do not use the appliance in an environment saturated with explosive or flammable steams.
–
Never immerse the appliance into water or wash it in running water!
– Use the appliance in the working position at places with no risk of turning over and in
sufficient distance from flammable objects (e.g.
curtains, drapes, wood,
etc.), heat
sources (e. g.
heater, stove
, etc.) and wet surfaces (e.g.
sinks, wash
–
basins
, etc.).
– Before plugging the appliance to power supply, always check whether the knife is attached
properly.
– Never put fingers into the knife area or use e.g. a fork or a knife to do so. In order to move
food towards the knife, always use the sliding plate with the attached pusher plate
if possible, given the size or shape of foodstuff.
– Use the slicer only for slicing defrosted food! Do not use it for slicing dry, hard bakery
products and bread, smoked meat with bones or meat with bones, fruit with hard stones,
food packed in aluminium foil or plastic foil.
– Always switch off the slicer if you wish to set the slice thickness or take out the knife.
– Before taking out the food, let the rotating knife stop completely first. After switching the
drive off, it runs down for a short time. After the operation, set the slice thickness regulator
to position
0
.
–
Do not exceed the maximum continuous operating time of the appliance, it´s
5
min.
– Make sure that the power supply cable does not get in between the rotating parts of the
appliance.
– Never put the power cord on hot surfaces and never let it hang over table edge or worktop
edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn and fall
down, causing a serious injury!
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
–
If you need to use an extension cord for justified reasons, it must be undamaged and
comply with the applicable standards.
– Use only designated accessories enclosed. Using other types of accessories can present
a risk for the operator.
–
Only use this appliance for the purpose it was designed for, as specified in this manual.
Never use the appliance for any other purpose.
– The producer does not undertake any responsibility for damage or injuries caused by
improper use of the appliance and the accessories (e.g.
food deterioration, injuries,
cuts
) and its guarantee does not cover the appliance in the case of failure to comply with
the safety warnings above.
II. FEATURES OF THE DEVICE (Fig.
1)
A – slicer
A1 – main switch
A2 – safety switch
A3 – slice thickness knob
A4 – strip thickness indicator (reference
scale)
A5 – foldable guide
B – cutting knife
B1 – nut
C – feeder
C1 – bottom plate of the feeder
C2 – rest with thumb protection
C3 – slider with food hold
C4 – guide projections
III. PREPARATION FOR USE
Remove all packaging material, remove the accessory. Remove all adhesive foils, stickers
or paper from the appliance. Wash the parts which will come in contact with the food in hot
water with soap before first use.
14
GB