eta 0762, Instructions For Use Manual

Page: 14 / 32

– The appliance has a hot surface. Persons insensitive to heat must be careful when using
the appliance.
– When the appliance is in operation, prevent pets, plants or insects from getting in contact
with it.
– The appliance is intended for home use and for similar purposes (in shops, offices and
similar sites, in hotels, motels and other residential premises, or in facilities providing bed
and breakfast service). It is not intended for commercial use!
– Do not plug the power cord in the electrical socket and do not unplug it with wet
hands or by pulling the power cord!
– Do not place any objects on the appliance.
– Never immerse the appliance into water or any other liquid (even its parts)!
– Holes for air ventilation must not be covered. Do not insert or throw any objects into the
holes.
– Avoid contact with the sealing wire when hot.
– If the appliance was stored at lower temperatures, acclimatize it first, by which you remove
stiffness and mechanical resistance of the plastic parts will be kept.
– It is not permissible to adjust the surface of the extra attachment (e.g. self – adhesive
paper, foils , etc.)!
– CAUTION – Do not use the appliance with a program, time switch or any other part that
turns the appliance on automatically as there is a risk of fire if the appliance is not covered
or placed properly.
– All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this language mutation.
– WARNING : There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– The producer does not undertake any responsibility for damage caused by improper use
of the appliance (e.g. deterioration of food, injury, burning, scalding, fire, etc. ) and
its guarantee does not cover the appliance in the case of failure to comply with the safety
warning above.
USE OF THE APPLIANCE:
– After completion of the vacuum process leave the cover of the
appliance open for the welding part to cool down.
–
CAUTION
– The appliance is not designed for constant operation.
Do not use the welder constantly for longer than 15 minutes, then
leave it to cool down for approx. 10 minutes.
– It is not intended for outdoors use.
– The appliance must not be used in damp or wet environment and in any environment with
the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and
other flammable or volatile materials are stored).
– Prevent penetration of liquid inside the air exhaustion section A4 !
– Do not seal fluids in liquid state. If you want to store liquid food (such as soups), first
freeze the food in an appropriate container, cut the food into pieces, put in bags and seal/
vacuum them. Put the individual bags into freezer.
– Do not place the appliance on unstable, fragile or flammable surfaces (e.g. glass, paper,
plastic, wooden varnished boards and various fabric/table cloths ).
14
GB
/ 27