14
II.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES (fig. 1)
H – Poppy seed mill
H1 – carrier (assembled)
H4 – pusher plate
H2 – cover with funnel
H5 – regulating disc
H3 – grinding discs (2 pcs)
H6 – key
III. PREPARATION AND USE
Remove all packaging material and take out the extra attachment. Remove all possible
adhesion foils, stick-on labels or paper from the accessories. Before the first use, wash the
parts that will be in contact with food (i.e. the carrier, cover, grinding discs, pusher plate) in
hot water with a detergent, rinse thoroughly with clean water, wipe till dry, or let it dry. Wipe
the carrier with a clean, wet cloth.
Assembly
(fig. 1)
Put carrier
H1
onto cover
H2
. Put “fixed” grinding disc
H3
onto the carrier, then start turning
with the disc slowly until the three arresting projections on the disc fit in the three created
indentations in the carrier. Now place the “moving” grinding disc (i.e. with grooves facing
each other) on the “fixed” grinding disc. Slide pusher plate
H4
onto the shaft so that the
central projection faces the opening in the grinding disc. Then start turning the pusher plate
slowly until the three arresting indentations on the plate fit in the three created projections
in the disc. Finally, screw regulating disc
H5
onto the carrier shaft and screw it.
Installation of the extra attachment into the drive unit
(fig. 2)
Slide the assembled poppy seed mill (with the gearwheel) onto the drive unit outlet at a 45
degree angle and by turning it slightly anti-clockwise, secure it in its horizontal position
(a click sound will be heard). To dismantle the assembled mill, press the appropriate
release control (e.g. button) on the drive unit, start turning the mill slightly clockwise as far
as it goes and then slide it out of the drive unit outlet.
Setting “fineness / coarseness” of grinding
(fig. 1, 3)
Fineness of grinding is set by a turning regulating disc
H5
. Turning the disc clockwise
reduces the distance between the grinding discs and thus the fineness/coarseness of
grinding can be changed. To release the regulating disc easily
H5
, use the release key
H6
.
Attention
– As soon as the grinding discs grind / rub against each other, the finest possible
degree of grinding has been set.
– If the graininess of the processed sample is now ideal, complete the grinding process on
the remaining amount of seeds. In case that you need to process a higher amount
of poppy seeds, make sure not to exceed the maximum operating time of the drive unit.
– When grinding a “higher” amount of poppy seeds, the parts of the extra attachment
can get hot (e.g. the grinding discs, pusher plate, carrier). Wait a moment before
disassembly and cleaning. Be careful not to get burnt.
GB
15
/ 27
