GB
16
Selecting the channel to be programmed
Acknowledgement:
C1 =
red and blue LEDs
flash
C2 =
green and blue LEDs
flash
C3 =
blue LED
flashes
Setting the brightness set value (100 lux - 750 lux)
Acknowledgement:
red and blue LEDs
flash 3 times
(channel 1),
green and blue LEDs
flash 3 times
(channel 2), the changes to the settings are
automatically stored.
Daytime operation setting (2,000 lux)
Acknowledgement:
red and blue LEDs
flash 3 times
(channel 1), no light measurement, light is only
activated by presence.
Daytime operation setting (2,000 lux)
Acknowledgement:
green and blue LEDs
flash 3 times
(channel 2), no light measurement, light is only
activated by presence.
Time setting for C1 & C2 = identical!
If no further movement is detected, the time
setting starts.
Time setting for C3
If no further movement is detected, the time
setting starts.
Switch between fully automatic and semi-automatic mode
for light channel C1
For semi-automatic mode, the
blue LED
turns off for
approximately 2 seconds. For fully automatic mode,
the
blue LED
flashes 3 times.
Switch between fully automatic and semi-automatic mode
for light channel C2
For semi-automatic mode, the
blue LED
turns off for
approximately 2 seconds. For fully automatic mode,
the
blue LED
flashes 3 times.
Switch between fully automatic and semi-automatic mode
for HVAC channel C3
For semi-automatic mode, the
blue LED
turns off for
approximately 2 seconds. For fully automatic mode,
the
blue LED
flashes 3 times.
Switch LEDs ON/OFF (red/green LED)
To switch LEDs off = press button, the
blue LED
will
turn off for approximately 2 seconds. To switch LEDs
on = press button, the
blue LED
will flash 3 times.
Restore factory settings
Confirmed by brief alternate flashing of the
blue
and red LEDs
on the detector.
