ESWOOD OPERATING MANUAL ES-32 June 2011
3
I
MPORTANT
:
PRIOR TO INSTALLATION
1
Installation must be carried out according to local regulations by
qualified trade persons. Isolating switch (as), shut-off valves etc must
be within easy reach of the machine for future service and
maintenance requirements. If in doubt call ESWOOD AUSTRALIA or
their representative for further information. No responsibility will be
accepted for defects or damages by improper installation, for changes
to the product not authorised by ESWOOD AUSTRALIA, or for
operation outside the technical specifications.
ESWOOD AUSTRALIA warrants their products to be free from defects
in material and workmanship under "normal use and service". This
does not include normal wear and tear of parts. ESWOOD
AUSTRALIA will repair or replace any parts, which in ESWOOD
AUSTRALIA's sole judgement are defective in material or
workmanship, in accordance with the warranty offered.
This undertaking covers the provision of labour and parts for 12
months from the date of delivery to the purchaser. This undertaking
applies only to state capitals. Remote areas are not covered by this
commitment and special enquires should be made. (
Note:
Travel
time not covered by warranty
)
In no event will ESWOOD AUSTRALIA be liable for loss of facilities or
other property and such things as, but not limited to, additional labour
costs, loss of revenue or anticipated profits, and other damages of any
kind whether direct, indirect, incidental or consequential.
Labour under warranty is supplied free of charge during normal
working hours, Monday to Friday. Should warranty work be requested
outside or our normal working hours a labour charge will be applied
equivalent to a normal hour rate without out of hour’s penalty rates.
(Refer to last page of this manual for your closest branch for Warranty
repair services)
Note:
It is the responsibility of the owner to ensure the water feed to
Eswood Dish and Glass washers is of a quality that will not form
excessive build up of calcium and other dissolved minerals on the
heating elements. Premature failure of heating elements that exhibit
this cause of failure will not be covered under warranty.