35
List of all supported CVs
List of all supported CVs
CV
Name
Description
Range Value
49
Function Mapping
„F6”
Servos that switch at turnout number 6.
0 - 255
32
Bit
Description
Value
- as CV 44 -
50
Function Mapping
„F7”
Servos that switch at turnout number 7.
0 - 255
64
Bit
Description
Value
- as CV 44 -
51
Function Mapping
„F8”
Servos that switch at turnout number 8.
0 - 255
128
Bit
Description
Value
- as CV 44 -
112
Servo 1
speed A
Running time (speed of rotation) towards end position “A”. Running time is a multiple of 0.25
seconds: 1 = 0.25s, 63 = 15.75s
0 - 63
15
113
Servo 1
End position A
End position A of servo 1st value indicates the pulse length that is sent to the servo.
0 - 63
24
114
Servo 1
End position B
End position B of servo 1st value indicates the pulse length that is sent to the servo.
0 - 63
40
115
Servo 1
speed B
Running time (speed of rotation) towards end position „B”. Running time is a multiple of 0.25
seconds: 1 = 0.25s, 63 = 15.75s
0 - 63
15
116
Servo 1
number of bounces
Number of bounces, if bouncing is active
0 - 31
0
117
Servo 1
Strength bouncing
Strength of the bouncing, if bouncing is active
0 - 31
0
118
Servo 1
Options
Settings for servo 1
128,136
128
Bit
Description
Value
136
0
Rocking switched off when position „A” is reached
Rocking switched on when position “A” is reached
1
1
Rocking switched off when position „B” is reached
Rocking switched on when position „B” is reached
2
2
Operating mode: digital mode (servo always stops at „A” or „B”)
Operating mode: Proportional mode (servo runs as long as the button is pressed)
4
3
SwitchPilot Extension: The assigned relay is switched immediately
SwitchPilot Extension: The assigned relay is switched with a delay
8
