Compatible with generic brands of 15.5 gauge staples & 16
gauge L-cleats.
(16 Ga. L Cleats)
7.2mm (9/32”)
38 mm
45 mm
50 mm
1-1/2
”
1-3/4
”
2
”
(15.5 Ga. Staples)
12.7mm (1/2”)
38 mm
45 mm
50 mm
1-1/2
”
1-3/4
”
2
”
07
06
Safety Information (Continued)
LOADING
THE
TOOL
Do not load the tool with fasteners when any one of
the operating controls is activated.
Never place a hand or any part of body in the fastener
discharge area of the tool.
Never point tool at anyone.
1.
2.
3.
Unpacking
Air inlet: 1/4 inch NPT
Magazine capacity: L Cleat: 100 pcs Staple: 90 pcs
Weight: 8.0 lbs
Maximum pressure: 115 psi
Pressure range: 70 psi – 115 psi
Pin size range: 1-1/2 in. to 2 in.
WARNING: The
warnings
and
precautions
discussed
above
cannot
cover
all
possible
conditions
and
situations
that
may
occur
.
It
must
be
understood
by
the
user
that
common
sense
and
caution
are
factors
which
cannot
be
built
into
this
product
,
but
must
be
supplied
by
the
user
.
Specifications
1.
2.
3.
4.
5.
6.
1.
4.
2.
3.
This
tool
kit
has
been
shipped
completely
assembled.
Carefully
remove
the
tool
and
any
accessories
from
the
box.
Inspect
the
tool
carefully
to
make
sure
no
breakage
or
damage
occurred
during
shipping.
Do
not
discard
the
packing
material
until
you
have
carefully
inspected
and
satisfactorily
operated
the
t
ool.
WARNING: If any parts are missing, do not
operate the tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
WARNING: Do
not
attempt
to
modify
the
tool
or
create
accessories
not
recommended
for
use
with
the tool.
Any
such
alteration
or
modification
is
misuse
and
could
result
in
hazardous
condition
leading
to
possible
serious
personal
injury.