Models No.
Description
PRODUCT
T
ECHNICAL INFORMATION
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
S
tandard equipment
O
ptional accessories
Note: The standard equipment for the tool shown above may vary by country.
P 1/ 14
AF500HP
Pneumatic Pin Nailer
Model AF500HP is a pneumatic pin nailer powered by high pressure air.
Drives 15 to 50mm (5/8 to 2") 23Ga Pin nails.
Its main benefits are:
Ultra-fine finish with almost invisible driver tip marking
Compact and lightweight design for high maneuverability
Slim contact arm and nose adapter for easy access to tight places
Contact arm with an extra-short stroke and non-marring rubber nose
adapter for protection of workpiece surface from damages/scratches
Safety goggles ................................................. 1
Oil supply (containing 30ml of turbine oil) .... 1
Nose adapter .................................................. 2
Hex wrench 3 ................................................. 1
Hook ................................................................ 1
Plastic carrying case ........................................ 1
Pin nails
Air hoses
Repair kit for trigger (containing O rings)
Dimensions: mm (")
Width 2 (W2)
Height (H)
Length (L)
228 (9)
45 (1-3/4)
Width 1 (W1)
Width 1: with Hook
Width 2: without Hook
61 (2-3/8)
207 (8-1/8)
Net weight: kg (lbs)
Magazine capacity: nails
Nail
Operating air pressure: MPa
[kgf/cm
2
]
(PSI)
1.1 (2.4)
140
0.98 - 2.26
[10 - 23]
(140 - 320)
23Ga
Nails per strip
100
15, 18, 25, 30, 35, 45, 50
(5/8, 11/16, 1, 1-3/16, 1-3/8, 1-3/4, 2)
Length: mm (")
Gauge (Diameter)
Pin nail
Type
W2
L
H
W1
