6
POWER ON AND POWER OFF
After powered on, all of the indicators and the digital display will flash on, and the buzzer will sound for
1 second . If the device was normally shut down before powered off last time, it will enter a standby state
after 1 second . The digital displays will all display 0, and the indicator will display speed level 1 . If the
motor was running when last powered off, the state before the unit was powered off will be restored
after 1 second, but the motor will change from a running state to a paused state . In case of a shutdown,
please stop the motor first and then unplug the power .
START AND STOP THE MIXER
Before starting the mixer, make sure the bowl is attached and the lift is engaged in the “up” position,
then press the start/stop button to start the motor . Whether the motor is started or not, you can adjust
the speed by pressing the up and down speed button arrows . You can also adjust the timer by pressing
the up or down timer arrows on the display .
If the timer is adjusted after the mixer is started, the adjustment time will not be remembered and
will only be effective for this operation . If the timer is not set to 0, the countdown will start again
immediately .
After the mixer is started, press the Start/Pause button in order to temporarily pause the running of
the motor . When the motor is paused, the timer will also stop until the Start button is pressed again, at
which time it will start again .
To return to the standby state, press the Stop button when the mixer is running or suspended .
HOW TO RECORD AND SET THE PROGRAM
1 . Press the
Start/Pause button to start the machine . Once this is pressed, the machine will begin
recording your actions .
2 . Use the
up and down arrows to select your speed preference .
3 . If you’d like your speed to change mid-mix, adjust speed at your desired time (for example: changing
from speed 1 to speed 2 at 30 seconds, just press the up arrow to the second speed indicator at the
30 second mark) . There is no need to pause or stop the mixer to change speed .
4 . If you want the mixer to pause to add ingredients, press the
Start/Pause button, and lower the bowl
lever (Error E2 will show in the display, disregard as that error just means the bowl is down) . This will
tell the program to pause itself at the desired time . (For example – if you want the mixer to pause at
60 seconds, press the Start/Pause button, lower the bowl, add ingredients, raise the bowl and press
the Start/Pause Button to begin again . This will be a saved function in your program .)
OPERATION
