ESTeem 210C User Manual Download Page 40

Page: 40 / 78

CHAPTER 4

UTILITIES & FEATURES

[[ peer table entry ]]

All entries in the Peer Table will have a
device entry index, both ESTeem and
other wireless devices

EST-MIB::wirelessPeersNumber.0

Total number of peer entries in table

wlan device

EST-MIB::wirelessPeerTable.1.pDevice.1

index into the wirelessDeviceTable (each
entry will have a unique number

Peer MAC Address

EST-MIB::wirelessPeerTable.1.pMacAddr.1

MAC address of peer

isRepeater? EST-MIB::wirelessPeerTable.1.pRepeater.1

Is the peer an ESTeem repeater

isAP?

EST-MIB::wirelessPeerTable.1.pAP.1

Is the peer an Access Point

isAssocSta? EST-MIB::wirelessPeerTable.1.pAssoc.1

Is the peer an Mobile Client

isAdhoc? EST-MIB::wirelessPeerTable.1.pAdhoc.1

Is the peer an AdHoc Station (802.11 only)

Frequency EST-MIB::wirelessPeerTable.1.pFreq.1

Frequency in MHz

current rate set

EST-MIB::wirelessPeerTable.1.pCurRates.1 Current Operating Rates

last rx signal

EST-MIB::wirelessPeerTable.1.pSignal.1

Receive Signal in –dBm

last rx noise

EST-MIB::wirelessPeerTable.1.pNoise.1

Background Noise in –dBm

BSSID

EST-MIB::wirelessPeerTable.1.pBssid.1

Basic Service Set ID (In Hex)

SSID

EST-MIB::wirelessPeerTable.1.pSSID.1

SSID in Text

isValid? EST-MIB::wirelessPeerTable.1.pCurrent.1

True if peer info is for a “current” peer.

last rx

EST-MIB::wirelessPeerTable.1.pLastRxl.1

seconds since last received packet from
peer

last tx

EST-MIB::wirelessPeerTable.1.pLastTx.1

seconds since last transmitted packet to
peer

current tx rate

EST-
MIB::wirelessPeerTable.1.pCurrentRate.1

current tx rate in bps.

Downloading MIB Tables

To download the MIB items listed above and import into your SNMP server, log into any ESTeem 210 and select the

About

page

(Figure 20). Press the Download MIB Files hyperlink on the page and save the files to your computer.

Figure 14: MIB Table Download

Revised: 5 Dec 12

4-11

EST P/N AA107-210CM

Summary of Contents for 210C















































































Search results

Summary of Contents for 210C

Reviews:

Related manuals for 210C

Brands by name

Popular brands

ESTeem 210C, User Manual

Search results

Summary of Contents for 210C

Reviews:

Related manuals for 210C

Brands by name

Popular brands