5
ELECTRIC INSERT INSTALLATION
ALWAYS unplug
this fireplace heater
before assembly
or
cleaning, or before
relocating.
Failure to do so could result in
electric shock
,
fire
, or
personal injury
.
Step 1.
Attach the top border (D) to the top edge of the insert with three screws (C).
Step 2.
Attach the right/left borders (E) to the right/left sides of the insert with six screws (C).
Tighten all screws securely with a Phillips screwdriver.
DO NOT OVER-TIGHTEN.
Note:
Mantel designs
vary. Consult the mantel owner’s manual for detailed installation instructions.
DO NOT
attempt to install the insert from the front of the mantel - it will not fit.
Step 3.
Place the mantel near where it will be used. Leave space to access it from the rear.
Step 4.
With the help of another adult, lift the insert (A) carefully into the back of the mantel. Use
care to avoid dragging the insert across the mantel base, as it could damage the wood surface.
Step 5.
From the front of the mantel, check to make sure the fireplace insert is properly aligned.
Step 6.
Attach the insert to the mantel with six screws (C).
Tighten securely with a Phillips
screwdriver.
DO NOT OVER-TIGHTEN.
E
D
A
C
C
C
A
C
C