4
PREPARATION
This insert has front panel made of
GLASS!
ALWAYS
use
extreme caution
when
handling
glass.
Failure to do so could result in
personal injury
or
property damage
.
NOTE:
Remove all parts and hardware from the carton and place them on a clean, soft, dry surface.
Check the parts list to make sure nothing is missing. Dispose of packaging materials properly. Please
recycle whenever possible.
Tools required for installation:
Phillips screwdriver (Not included)
ELECTRIC INSERT: PARTS & HARDWARE
Item
Description
Qty
The remote control uses one 3V CR2025 Lithium Cell Battery (included).
A
Fireplace Insert
1
B
Remote Control
1
C
Screws (*2 extra)
17*
D
Top Border
1
E
Left/Right Borders
2
Remote Control Set-up
Fig. 1:
Remove the plastic sheet from the end of the remote control to allow the battery to
touch the electrical contacts.
If the sheet is not removed, the remote control will not work.
Fig. 2
: To install or replace the battery, press the button to allow the battery case to slide out.
Position the battery according the drawing, and slide the case back in to the remote.
Fig. 1
Fig. 2
Always
purchase the correct size and grade of battery most suitable for the intended use.
Clean the battery contacts
and also those of the device
prior to battery installation
.
Ensure the batteries are
installed correctly
with regard to polarity (
+
and
-
).
Remove batteries
from equipment which is not to be used for an extended period of time.
Remove used batteries promptly
.
NEVER
dispose of batteries in
fire.
Failure to observe this precaution
may result in an
explosion
.
Dispose of batteries at your local hazardous material processing center.
ALWAYS
replace the battery in the remote control with the
same type of battery
.
Failure to do so may result in
personal injury
or
property damage
.
B
A
C
E
D
