Control Board Overview
E-S 1000D Series Instruction Manual
5.9
!
CAUTION!
Do not run 110V AC power direct to the
board. This will cause permanent damage to both
boards and void your warranty. Caution!
Display
Indicators:
Lights off on board & stand by / normal operation
Lower right hand dots flashing normal pace:
Active / Awaiting command
EL:
Sending voltage to EL terminals (electric lock)
OP:
Opening cycle
AU:
Auto-reclose countdown
CL:
Closing cycle
PH:
Photocell is tripped or not jumped.
LU:
Low Voltage Lock Out
Buzzer/
Obstructions:
If the gate(s) come in contact with an obstruction the
gate(s) will reverse direction for 2 seconds and stop to
allow the obstacle to be cleared from the gate path.
If the gate(s) obstructs 3 times in a row the gate(s) will go
into a hard shutdown mode and a buzzer alarm will
sound. At this point no accessories or remotes will be
able to activate the gate opener until the gate opener is
reset by disconnecting primary power battery.
Summary of Contents for E-S 1000D Series
