COVERING AND EQUIPMENT
INSTALLATION
40.
Join elevators with the plywood part(E6).
41.
Paint cockpit area, landing gear retainer(G5), landing
gear struts and tail wheel.
42.
Insert and glue plastic pipes for elevator and rudder
pushrods.
43.
Paint instruments back panel.
44.
Attach instruments panel sticker.
1.
Cover and paint cowl, canopy with your own color scheme.
2.
Cut CA hinges as shown above.
3.
Make hinge slots and install hinges.
(Do not glue hinges to
the control surfaces in this step.)
4.
Insert flap hinges and horns(P8-P10). Use 2mm wire to
align easier. Temporarily glue with small amount of CA. After
throwing check, and then glue them firmly.
Page 7
Summary of Contents for AIR TRACTOR AT-802
Page 10: ......
