18.
Carefully sand surfaces.
FUSELAGE CONSTRUCTION
11.
Assemble aileron sub leading edge(A2) and ribs(A3)
and then, glue them.
12.
Glue aileron leading edge(A5) and trailing upper
sheet(A4).
13.
Assemble flap sub leading edge(P2) and ribs(P3, P4)
and then, glue them.
14.
Glue flap leading and trailing upper sheets(P5, P6).
15.
Glue flap leading edge(P7).
16.
Carefully sand surfaces.
17.
Glue trailing edge(W27) with
thick CA
.
Refer to the wing section on the drawing and use
cardboard to make a gap.
1.
Glue the longerons (F3a, F3b) together on the plan.
2.
Glue the longerons (F24a, F24b) together on the plan.
3.
Lay right side panel(F1) on the plan and temporary
assemble plywood doubler(F2) and longerons(F3, F7).
4.
Glue Bulkheads(F14, F15) together.
5.
Assemble plywood wing mounts(F8-F9, F12 & F10-F11,
F12).
After insertion check the wing joiners(W11, W12) and then
glue each other.
Page 3
Summary of Contents for AIR TRACTOR AT-802
Page 10: ......
