6.
Temporary assemble right longeron(F5), bulkheads
(F14, F15) servo bed(F4) and wing mounts(F8-F13).
7.
Assemble left side plywood doubler(F2), longeron(F5)
and glue with thin CA.
8.
Assemble left side panel(F1) and glue with thin CA.
9.
Temporary assemble fore fuselage bulkheads(F17,
F18) and longeron(F24).
Make sure to pay attention to bulkheads F17, F18 the
numbers should be facing forward.
10.
Temporary assemble longerons (F16, F32). Glue all
the parts with thin CA.
Apply thick CA glue at each joints for reinforcing.
11.
Glue landing gear mounts(G1, G2) with
thick CA
.
12.
Glue landing gear mounts(G3, G4) with
thick CA
.
13.
Assemble left side and bottom panel(F19, F27) and glue
with thin CA.
14.
Temporary assemble rear fuselage bulkheads(F21-F23)
and longerons(F6, F20, F25).
15.
Prepare side panels(F26R, F26L).
16.
Assemble side panels and glue with thin CA.
Apply thick CA glue at each joints for reinforcing.
17.
Assemble bottom panel(F28, F29) and glue with thin CA.
Page 4
Summary of Contents for AIR TRACTOR AT-802
Page 10: ......
