Essilor AKR 750 Maintenance Manual Download Page 55

Page: 55 / 66

12-6

Replacement of the chin rest ASSY, the head rest cover, the chin

rest sensor harness, the chin rest motor ASSY

Replace the chin rest ASSY after unscrewing 3 fixing screws and removing the harnesses

that are connected to the main unit.

Head rest cover

Fixing screws

Head rest cover
fixing screws

Harness cover

Fixing screw

Replace the head rest cover after unscrewing 4 fixing screws that fix the head rest cover.

Replace the chin rest sensor harness after removing the head rest cover in manner of 2)
and unscrewing the fixing screw that fix the harness cover.

Chin rest motor BKT

Chin rest motor harness

Fixing screws

Chin rest sensor harness

Rubber belt

Replace the chin rest motor ASSY after removing the 2 covers in manner of 3) above,
remove the chin rest motor harness and the rubber belt, and unscrewing 2 chin rest
motor BKT fixing screws.

Unscrew 2 pulley fixing screws, 4 motor fixing screws, and remove the chin rest motor

ASSY.

Fixing screws

Fixing screw

Summary of Contents for AKR 750



































































Search results

Summary of Contents for AKR 750

Reviews:

Related manuals for AKR 750

Brands by name

Popular brands

Essilor AKR 750, Maintenance Manual

Search results

Summary of Contents for AKR 750

Reviews:

Related manuals for AKR 750

Brands by name

Popular brands