Essilor Instruments SL 650, User Manual

Page: 11 / 52

U
SER MANUAL
> G
ENERAL DESCRIPTION
15. Slit movement platform: Moving up and down to makes the slit opening and closing, and the lower scale
shows the angle between the slit and the vertical direction.
16. Slit height control knob: Rotate this knob to adjust the spot and the slit height. Swing the knob
horizontally to revolve the slit.
17. Filter selection lever and display mark: The lever can choose different filters.
18. Aperture slit height and display window: It will display the diameter of the slit and the aperture.
19. Lamp cap: With the function of protecting and insulating, its normal working temperature is around 51°C.
20. Power plug.
21. Where the light source component power is connected, the fixation knob of lamp cap. After fixing the
knob, the lamp cap will not move.
22. Headrest belt: To fix the patient's head on an appropriate position.
23. Fixation target: Make the patient stare at it, it is convenient for checking.
24. Chinrest paper fixing bolt : For fixing the pad paper.
25. Chinrest: Supporting the patient's chin.
26. Focusing testing rod.
27. Chinrest elevation adjustment knob: Rotate the knob to adjust the elevation of the chinrest.
28. Illumination arm locking knob: When the knob is tightened, the illumination system and the observation
system are in a linked state and can rotate together. When the knob is loosened, the illumination system
can be rotated separately.
29. Microscope arm locking knob: Lock the observation system so that it cannot rotate.
30. Power input: Used to supply power to the power module.
31. Power output: Used to power main lamp and fixation target.
32. Power switch: Press the power switch button once to turn it on, then press the button again shortly to
enter standby mode, and press and hold for 3 seconds to turn off all power.
33. Rail cover.
34. Digital module
Apply to S650L Image System.
11 SL650L - Slit lamp microscope > V1 - 10-2021 - CE
34