beforeuse
30
V.4.0
beforeuse
Assemblingthewheels
WARNING: Please completely assemble the air
cooler before switching it on.
Insert the two front wheels (with an extra tab) into the front supports and the two rear wheels
into the rear supports underneath the unit.
Fillingthewatertank
To activate the “Cool Air”
function, you have to fill the air cooler’s tank (7).
Please follow these steps:
1.
Make sure that the unit has been turned off and unplugged from the power point for at
least 3 minutes.
2.
Press the tab on the tank to release it, and then remove it from its housing.
3.
Insert the two ice packs that you have taken out of the freezer into the tank. This will
produce even cooler air.
4.
Fill the water tank with cold tap water, making sure that the water level is between the
MIN
and
MAX
marks on the tank.
5.
Put the tank in back its housing and make sure it is properly positioned to prevent any risk
of leakage. Also make sure that the tank’s filter is in its housing.
Please note:
the “Cool Air”
function cannot operate without water. When the water
tank is empty and the “Cool Air”
function is activated, the unit beeps and the indicator
lamp for the “Cool Air” button flashes on the control panel. The function is automatically
disabled.
Front wheel (x 2)
Rear wheel (x 2)