Installing the PIR
22
Care@Home™ Motion Detector User Guide
2.5.
Conducting a Walk Test
A
Walk Test
is a function and signal verification check. The test is used to determine the detection
area of the PIR.
The
Walk Test
mode starts automatically after the PIR powers up, such as:
When a new battery is inserted
After adding and pairing a new PIR with the Care@Home
™
system
This mode lasts 10 minutes.
During the
Walk Test
, you can check the detection area of the PIR by walking past it at different
points. The LED on the PIR lights up for any motion the PIR detects. The PIR sends a notification of the
motion detection event to the CP.
