Essence Technology EAG Series, Administration Manual, Page: 51 / 99

1/5/2007 EAG Gateway Series Administration Guidelines MAG-06007 Rev. A
ƒ
Routes that have FXX/FXS as Destination can use the Destination Information as the route
or to hunt for an idle line
ƒ
Routes that have IP as Destination: the Destination Information section must provide a
specific gateway IP address plus its SIP port number (if no port number is defined, use the
default port number 5060). For example: 192.168.2.10:5066
If the IP address is local, use format localhost:5060 or 127.0.0.1:5060. For example,
IP 8621 ROUTE FXS 1
IP CPN8620 ROUTE FXS 2
This means a call to the called number from an IP address that starts with 8621 will be
routed to the first FXS line; while a call with calling number that starts with 8620 will be
routed to the second FXS line.
Another example:
FXS 021 ROUTE IP 228.167.22.34:5060
FXS 020 ROUTE IP 61.234.67.89:5060
This means a call to the called number from an FXS that starts with 021 will be routed to IP
address 228.167.22.34; while a call from an FXS that starts with 020 will be routed to IP
address 61.234.67.89.
IP CPN[1, 3-5] ROUTE NONE
This means a call from an IP address with calling number that start with 1, 3, 4, and 5 will not
be routed.
5.8.3 Feature Code
After logging in, click Advanced Config > Feature Code , and you will see the following:
Note: For information on how to use Submit and Default, see 5.2.
47