manualshive.com logo in svg

Essence Technology EAG Series, Administration Manual, Page: 31 / 99

Share
Download
Essence Technology EAG Series Administration Manual Download Page 31

1/5/2007 

EAG Gateway Series Administration Guidelines   

MAG-06007 Rev. A 

 

 

At the bottom of each configuration page, you will see two buttons: Submit and Default. 

․ 

Submit:

 When you are done with configuration, click this button once so that the configuration 

can be saved. After each submission, you will be prompted by “Submission is successful. Please 

restart the gateway!” You need to click OK to confirm the action. 

․ 

Default:

 Click the button once to restore the factory default setting for each parameter. 

Note:

 Clicking this button only restore the defaults settings for the current page. It is different from 

System Tools -> Restore Factory Default in that the latter restore the default settings for the 

whole system. 

When the restoration is successful, you will be prompted by “The settings are successfully restored. 

Please restart the gateway!” You need to click OK to confirm the action. 

27

 

Summary of Contents for EAG Series




































































































Reviews:

No comments