ESS TRG-5, Owner'S Manual, Page: 15 / 41

9
ess TrG Owner’s Manual
Sil-Glyde is an excellent silicone-based
protective lubricant. You may purchase
it directly from ESS. S/N # 3174
TRG-5 maintenance schedule
Please observe the recommended maintenance schedule for your TrG-5 sprayer in order to preserve
spray quality and the working life of the unit. If you use heavy wettable powders to spray or if you operate
the TrG-5 in a dusty environment, you may need to clean liquid and air filters more often than these rec-
ommendations. Visually inspect the nozzle and trigger assembly often and clean as necessary.
Clean the liquid filter assembly after every spray application
empty the bowl filter of water weekly or when air pressure drops**
Clean the nozzle when the spray pattern is different than when
the TrG-5 was new
Clean the spray gun when unequal streams of water come out of the
nozzle
Clean the liquid filter at hose reel and spray gun
after every spray application
recharge batteries in spray gun when charging indicator does not light during
operation (about every 8 operational hours)
replace batteries in spray gun when batteries no longer hold a sufficient
charge to complete a ten-hour work session
or show other signs of battery deterioration
Clean air inlet filter as needed
Check and tighten bolts every month
** whichever comes first
12. engage the trigger and allow remaining quart of water to
run through to clean spray gun; allow air to flow for
30 seconds more to reduce possibility of corrosion.
13. Disconnect the spray gun quick connects and the tank
quick connects.
14. Disconnect air inlet hose from external air source.
15. apply silicone spray or a similar lubricating oil to all quick
connect sockets.
16. Connect the spray gun quick connect sockets to frame
quick connect plugs; reconnect the tank quick connects.