May 19
th
, 2021
Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 9 -
2.4 Laser Safety Precautions
This product is classified as
Class 1
Laser Product and complies with
IEC 60825-1: 2014
and
IEC 62471-5: 2015 Risk Group 2 (RG2)
.
To ensure safe operation, read all laser safety precautions mentioned below before installing and
operating the projector:
▪
Class 1
Laser Product. Do not deliberately look into or stare into the beam, which can cause
injury to the retina in the back of the eye.
▪
This projector uses an extremely high brightness laser. Never attempt to look directly into the lens
or the light beam. The bright light may result in permanent eye damage. (Risk Group 2 of IEC
62471-5:2015).
▪
When switching ON the projector, make sure no one within the projection range is looking
into the lens.
▪
Keep any reflective objects out of the light path of the projector. Glass and shiny surfaces can
reflect the light beam from the lens as the light path is extensive and the reflective beam can
cause unpredictable incidents such as fire hazards or eye injuries.
▪
Any operation or adjustment not specifically instructed by the Supra-5000 Manuals creates the
risk of hazardous laser radiation exposure.
▪
Do not open or disassemble the projector as this may cause damage by the exposure
of laser radiation.
▪
Failure to follow the control, adjustment or operation procedures may cause damage by the
exposure to laser radiation.
