manualshive.com logo in svg

Espedeo Supra Supra-5000, Installation Manual

Share
Download
Espedeo Supra Supra-5000 Installation Manual Download Page 10

May 19

th

, 2021

 

Supra-5000 Digital Cinema and Secured Media Projection System  
Installation Manual 
 

 

- 10 - 

2.5   Important Safety Instructions 

  Preventing the Hazard of Electric Shock 

▪

 

The projector should use AC power. Ensure that the main voltage matches the rated power of the 
projector. If the installation environment cannot meet the AC power requirements, please contact 
the electrician. 

▪

 

The installation can only be carried out by qualified technical personnel in accordance with local 
electrical codes and regulations. 

▪

 

This equipment uses a three-connector power cable, including a single-phase wire used for 
protective earthing (PE). If the installation environment cannot meet the AC power requirements, 
please contact the electrician. Please do not ignore the role of PE. 

▪

 

The power input socket delivered with the projector only supplies power to the projector. Do not 
connect other devices to this power input socket. 

▪

 

The circuit breaker in the power supply circuit of the projector is a universal disconnector that cuts 
off the power supply of the complete set of devices. 

▪

 

The projector is completely powered off only after you turn off the projector and remove the  
power cable. 

▪

 

Do not place anything on the power cable. Please arrange the power cable properly so as not to 
trip the pedestrian, be stretched or touch the hot surface. 

▪

 

If an extension cable must be used, the rated current of the extension cable shall be at least 
equal to the rated current of the projector. If the rated current of the extension cable is lower than 
that of the projector, the extension cable will be overheated and catch fire. 

▪

 

If the power cable is damaged or the projector is dropped and damaged, do not operate the 
projector until the qualified maintenance personnel have checked and confirmed that  
it is operational. 

▪

 

Please do not place any objects in the housing slot of the projector, as they may touch dangerous 
voltage points or short circuits, causing a fire or an electric shock. If any liquid or solid enters the 
housing, remove the plug and seek help from the professional maintenance personnel before 
continuing to use the projector. 

▪

 

Please do not expose the laser light source to rain or moisture. It is recommended to place the 
projector in a well-ventilated area away from fire and direct sunlight. 

▪

 

Please do not immerse the projector in water or other liquids, nor contact with water (including 
splashing water) or other liquids. 

▪

 

To better protect the projector during lightning storms or prolonged unattended and unused 
conditions, remove the power plug from the power socket and disconnect the communication 
cables. This protects the projector from being damaged by a lightning strike or AC wire surge. 

 

 

WARNING 

A large current leakage may occur. Therefore, the projector must be grounded properly  
before it is powered ON. 
 
 
 
 

Summary of Contents for Supra-5000













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands