May 19
th
, 2021
Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 52 -
Figure 32:
NOTE
▪
Before proceeding with color calibration, it is recommended to perform the lens back
focus adjustment (refer to
Section 9.1
) and DMD convergence (refer to
Section 9.2
▪
For 2D color calibration, set the color type to
‘2D’.
▪
For 3D color calibration, set the color type to
‘3D’. By default, the ‘DEFAULT-3D’ device
is used for 3D color calibration.
▪
While performing a 3D color calibration, the 3D filter unit should be placed in front of the
projector lens and measurements should be taken through a pair of 3D glasses.
▪
The corrected color files should be differentiated between 2D and 3D and used for the
corresponding 2D or 3D macros.
