Esoteric Grandioso P1, Owner'S Manual

Page: 27 / 104

27 27
En
gl
is
h
Meanings of items shown in setting mode
OUT>***
Output connector/format setting
Set the output connector and the type of upconversion.
UPC-A>***
Upconversion algorithm setting
Set the upconversion algorithm used during CD playback.
CLK>***
Clock sync mode setting
CLKin>***
Change the input connector used to receive a clock sync signal.
DAC>***
D/A converter setting
Set the type of connected D/A converter.
DPaOFF>***
Automatic display darkening setting
LAYER>***
Priority playback area setting
Set which layer to use first for playback when a hybrid disc that con-
tains both Super Audio CD and CD layers is loaded.
APS>***
Automatic power saving setting
Output connector/format setting
OUT>***
Set the output connector and the type of upconversion.
By default, the setting is ESLINK.
ESLINK
The audio signal is output from the ES-LINK connector.
During CD playback, the signal is output after 8X upconversion in
48-bit format.
DUAL_8
Two XLR jacks are used to output left and right signals separately.
CD playback is output after 8X upconversion.
DUAL_4
Two XLR jacks are used to output left and right signals separately.
CD playback is output after 4X upconversion.
DUAL_2
Two XLR jacks are used to output left and right signals separately.
CD playback is output after 2X upconversion.
XLR_4
The stereo signal is output from one XLR jack.
CD playback is output after 4X upconversion.
XLR_2
The stereo signal is output from one XLR jack.
CD playback is output after 2X upconversion.
XLR_1
The stereo signal is output from one XLR jack.
Upconversion will not occur.
RCA_4
The stereo signal is output from one RCA jack.
CD playback is output after 4X upconversion. SACD audio cannot be
output this way.
RCA_2
The stereo signal is output from one RCA jack.
CD playback is output after 2X upconversion. SACD audio cannot be
output this way.
RCA_1
The stereo signal is output from one RCA jack.
Upconversion will not occur. SACD audio cannot be output this way.
i.LINK
The audio signal is output from the i.LINK connector.