PSM 10/12/15 Series Installation manual
Esoltech AB, the battery company
May 1, 2019
30
The battery controller comes with a green jumper that needs to be installed. The power to the
controller is cut off if the jumper is removed.
Insert the jumper according to the following diagram
The battery controller has no power output if the QS breaker is switched off. The QS breaker
on the battery controller module is switched on by default.
Make sure all the connection is properly done before switching the QS to ON.
6.2 Finishing up
It is the last step of the installation. Put back all the side panels in reverse order they were
removed. Make sure all the screws are properly fastened.
Note: the PSM system does not come with any switch.
