PSM 10/12/15 Series Installation manual
Esoltech AB, the battery company
May 1, 2019
25
5.1 DC-Link cable
The ESO comes with a
Phoenix Contact 5P socket
on the back of ESO adaptor for easy
cable installation. The socket is seen on the righthand side in the diagram below.
Consider sorting out the cable before connection.
To connect the cable:
•
Peeling off the cable insulation according to the following diagram.
•
Install one cable at a time, apply force evenly and gently in the direction towards the
cable socket, make sure each cable is fully inserted.
•
Once fully inserted, the cable is locked inside the socket.
Note: if properly inserted, the installed cable cannot be removed without using a
tool. Properly installed cable looks like the one in the following.
DC Link
Battery
Controller
Module
ESO
Adaptor
