Screw (3x15mm)
2
2
Screw (3x15mm)
Marked place
Washer (3x6mm)
Washer (3x6mm)
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
A
A"
A = A"
Wooden plate (2mm Ply)
Wooden Block (2mm Ply)
2
Fiberboard (2mm)
Fiberboard (2mm)
3mm
6mm
Rib template (2mm ply)
Rib template (2mm ply)
Wood dowel (6x30mm)
6mm
2
Wooden plate (2mm Ply)
4
Wood dowel (6x30mm)
1
Rib template (2mm ply)
Main wing joiner(30x400mm)
2
15mm
Main wing joiner(30x400mm)
Screw
Blind Nut
Washer
Screw
Blind Nut
Washer
2x20mm
According to the rib template drill holes and trim a slot in
the outer wing root and epoxy wood dowels in the holes.
According to the rib template drill holes and trim a slot
in the centre wing root.
Trim the covering of the hole for wing fastening.Put the
wooden supplied plate into the wing root slot until the holes
match very well,mark out and cut off the suplus parts.
Drag one side of the fiberboard out from the slot in the center wing root until the length of the outer
parts of the fiberboard is same as the wooden plate.Drill a hole to the fiberboard according to the
wooden plate and epoxy the it hardly in the center wing root.
Assemble the outer wing to the center wing.
Fix the outer wing to the center wing with screw
as illustration.
3
16
15
14
11
12
13
TP Screw (2.3x12mm)
Wooden Block
TP Screw (3x20mm)
Collar (5mm)
Wooden supporter
Epoxy the fixed landing gear to the main wing.
Install the wheel to the fixed landing gear.
Wooden Block (9mm Ply)
Wooden Block (3mm Ply)
TP Screw(3x20mm)
Washer (3x6mm)
TP Screw(3x20mm)
Washer (3x6mm)
4
4
1
1
Wooden Block (9mm Ply)
Wooden Block (3mm Ply)
Wooden Block (9mm Ply)
Wooden Block (3mm Ply)
Assemble the wheel mount to the thick wooden block
with screw,cut the surplus parts and epoxy the thinner
wooden block to it as illustration.
Connect the servo of rudder and the arm of tail
landing gear with steel wire.
Epoxy the whole wheel mount set to the form in the
fuselage and be carefule don't let the arm touch the
fuselage when it works
Tail wheel (45mm)
Collar
Tail landing gear
Tail gear mount
Collar
Collar
The sketch map when assemble the tail landing
gear to the wheel steeling mount.
2
Steel wire (0.5x3000mm)
wheel mount servo.
72
74
73
75
73
75
14
