TP Screw (2.3x12mm)
Rod (2x300mm)
Clevis
Clevis
Lock Nut (3mm )
Screw (3x10mm)
Nut (3mm )
Screw (4x45mm)
Washer
Washer
Rod (2x300mm)
Ball joint
2mm
Copper joiner
Screw (2x10mm)
Nut (2mm )
Copper ball (2mm )
Nut (2mm )
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
4
Pin hinge(4.5x67mm)
5mm
Make sure hinges are
mounted in the same line.
5mm
3mm
13mm
86mm
Set screw (3x4mm)
1.5mm
3mm
2
Fiberboard (1.5mm)
16
4
4
4
4
Clevis
Rod (2x300mm)
TP Screw (2.3x12mm)
Wooden Block(20x20x8mm)
Servo tray(68.5x56.5x2mm)
12
Pin hinge(4.5x67mm)
Linkage Stopper
4
4
Copper joiner
4
8
Screw (2x10mm)
Nut (2mm )
Main wing joiner(30x400mm)
2
4
Wood dowel (6x30mm)
1
Rib template (2mm ply)
2
Fiberboard (2mm)
2
Screw (3x15mm)
Secure the servo,assemble the servo to the relevant
position in the outer wing.
2
Wooden plate (2mm Ply)
Install the nylon control horn and connect the linkage
for the servo of flap.
Drill holes in the flap and epoxy the pin hinges in them.
Drill holes to relevant position in the trailing edge and flap,
trim a holes to appropriate position in the trailing edge for
the linkage of flap servo.
Secure the servo,assemble the servo of flap from the
big hole in the outer wing root and epoxy the flap to
the outer wing.
6
7
8
2
9
10
Accessory list for the coming installation steps.
ELEVATOR
Side View
25mm
25mm
Top view
Position for
right diagram.
Never fly before checking CG’s required position.
In order to obtain the CG specified reposition the
receiver and battery.
135mm
Right view
Side View
30mm
30mm
RUDDER
30mm
30mm
AILERON
Side View
40mm
FLAP
AILERON
FLAP
Adjustment.
Adjustment.
Adjustment.
The centre of the Gravity.
76
77
78
79
73
75
15
