Esko Kongsberg XL, Service Manual

Page: 15 / 59

i-XL Service Guide
15
8. Software installation
8.1 Install XL-Guide
Insert the XL-Guide CD in the Front end PC. From the XL-Guide CD, start Setup.exe. Follow
instructions on screen and install in default directories.
You will find more information about software installation in the XL-Guide online help manual.
8.2 Install i-Cut hardware and software
Before installation of i-Cut software can begin, you must complete the following:
1. Install the Epix PIXCI Video Capture Board into an unused PCI slot in your computer.
2. Connect your i-Cut dongle to an available USB port. Two dongles are included in the delivery,
one for production preparation and one for cutting table control. On the Front end PC, the
cutting table control dongle should be used.
3. Connect the plotter and vision system to your computer.
4. Log onto your Windows® operating system administrator account.
5. Insert the i-Cut installation disc into your CD-ROM compatible drive.
Installing i-Cut requires adding the following three software components to your system:
1. Epix PIXCI Video Capture Board Driver
2. HASP copy protection support
3. i-Cut main program
You will find more details regarding software installation in the i-Cut User‟s manual.
8.3 How to update the i-Cut license codes
From PC Desktop or Start menu, start i-Cut.
From the Options menu, select –Configuration:
The options available from the license defined by current dongle are listed in this dialog.