Type / N.
Rev.
Data
Page
Total pages
EW095.605
5
November 2010
67
96
EsiWelma
s.r.l.
for 5 seconds
9.5
Alarm reset
This has the purpose of recognizing the alarms and of restoring the normal operations (See
Par. above). Obviously “ALARM RESET”
is only valid if manual alarm reset has been
selected.
From the main menu, press until the words “ALARM RESET” appear.
NOTE
The "ALARM RESET" will only come into effect if the cause of the alarm no longer
exists; otherwise (in other words if gas is still present), the control unit will bring up
the still active alarm conditions.
To reset the relays on the relay module inside the control unit (RM0), it is necessary
to exit the screen as per Fig. 9.22 by pressing ESC.
M
A I N M E N U
A L A R M R E S E T
Fig. 9.19
A L A R M R E S E T :
P R E S S + / - 5 S E C
S I M U L T A N E O U S L Y
Fig. 9.20
A L A R M R E S E T :
R E S E T I N P R O G R E S S
Fig. 9.22
A L A R M R E S E T :
P R E S S + / - 5 S E C
S I M U L T A N E O U S L Y
Fig. 9.21
