UGM96
ESI
8
You will now be prompted to connect the hardware on the next dialog that is shown below on the
left. Plug in UGM96. Do not click
Next
yet. Instead, wait a few seconds for the automatic device
driver installation. You can monitor this in the task notification area where Windows Vista informs
that the driver is installed via a bubble message box.
You can now finally click
Next
on the
ESI UGM96 Audio Driver Setup
dialog. The installation is
now finished. To confirm this, please check if the ESI icon is displayed in the taskbar notification
area as shown below.
If yes, the driver installation has been completed successfully.
3.3 Mac OS X
Mac OS X already provides support for class compliant USB audio devices such as UGM96. This
means that no software or driver needs to be installed to use UGM96 under Mac OS X. Simply
connect the unit with the supplied USB cable to your Mac and you can start using it.
Controlling the basic options of UGM96 under Mac OS X is mainly done via the
Audio MIDI Setup
utility from Mac OS X described in section 5.3 of this manual.
