UGM96
ESI
14
Enter your serial number and click
NEXT
. The screen on the left below with your
INSTALL CODE
will appear. Write down the code or click on
COPY
to copy the code into the clipboard. Then click
NEXT
and the dialog on the right below will appear:
Now launch your web browser and go to www.studiodevil.com/activate (this can also be done on a
different computer if you do not have internet access at this very moment) to display the product
activation web page for Studio Devil. Enter or paste the
INSTALL CODE
you just obtained into the
space provided on the web page and click
Get License Key
. The web server will now respond with
your
LICENSE KEY
. Write it down or copy it into the clipboard.
Then go back to Studio Devil VGA and click
NEXT
. In the dialog shown below on the left, enter
the
LICENSE KEY
or paste it, then click
NEXT
. The confirmation screen will appear as shown on
the right.
Confirm it by clicking
CLOSE
. You can start using Studio Devil VGA now, the activation
procedure has been completed. Chapter 6 explains more about the usage.
5.6 Other bundled software
UGM96 comes also bundled with other software and plugins that you can use inside Cubase LE 4,
perhaps in combination with Studio Devil VGA. You can find them in the
Softwarebundle
folder on
the Installation CD.
Among others, the
ESI Atti-Tube
plugin (Windows only) is a nice amp simulator that can be used
nicely with electric base guitars. The
ESI FX-Pack
(Windows only) and the
Luxonix LFX1310
multi-effector plugin (Mac OS X and Windows) are great enhancements over the included standard
effect plugins from Cubase LE 4, so it will not hurt to install and check them out.
