4
S2S SIT-TO-STAND
SET-UP
Test Operation
• To prevent the unit from abruptly raising up, hold the top of the unit while squeezing the paddle lever. Raise
the unit to its maximum height and release the lever.
CAUTION:
Keep both hands on the top platform to control the rate of movement when operating the
paddle lever. Be prepared to release the lever immediately if it appears there is not enough clearance
for the monitor(s).
• Check that there is at least 1" of clearance between the top of the monitor(s) and any overhead
obstructions.
• Squeeze the paddle lever again and press the top platform down to its lowest level.
• Ideally, it should take about the same amount of force to raise the unit as it does to lower it. If there is a
Paddle
Lever
