6
2S SIT-TO-STAND
ADJUSTMENT
Adjust for Load Weight
This adjustment can be used to maximize ease of operation. When operating this product, the platform
should move easily to any position and hold that position.
•
•
–).
• Use the 6mm ratchet wrench to turn the adjusting mechanism — counterclockwise to increase load,
clockwise to decrease it. The ratchet only turns one direction, therefore if it doesn’t turn, flip it over.
• Test operation and re-adjust as necessary.
CAUTION:
Do not overtighten the MAX (+) adjustment.
Final Set-Up
• Move the unit to its maximum height.
• Connect the monitor cable(s) and power cord(s), as well as the
keyboard and mouse cords, if applicable.
— Use extensions, if necessary. The cables and cords must reach
their connections when the unit is at its highest point.
• Use the circular clips at the bottom rear of the top platform to
capture the cables and cords.
6mm Wrench
Tool storage
• When finished, the ratchet and Allen key can be stored in the built clips on the underside of the worksurface.
Note: 180° lock-out feature must be utilized with monitor
arms.
