5
ADJUSTMENT
S2S SIT-TO-STAND
Make Any Necessary Adjustments
If the product operates to your satisfaction, there is no need to make any adjustments. You may skip to
“Final Set-Up” on page 6.
The two possible adjustments are for keyboard platform projection (below) and load weight (page 6).
Increase Keyboard Platform Projection
• To project the keyboard platform approximately 1
3
/
4
remove the 12 screws holding the platform in place.
— This adjustment may be performed with the unit inverted or with the unit upright. The inverted method
is shown below for illustration clarity.
• After removing the screws, move the platform forward and re-attach the screws.
Remove
12 Screws
4mm Allen Key
