ESI ESI2000, Operation Manual

Page: 142 / 272

134
ESI Operation Manual
4. Select the desired gain change points and press ENTER.
GAIN secs samples
Start: 0.00 000000
End: 3.13 137873
Size: 3.13 137873
The display will show the current gain change points, which are the end
points of the current sample. After pressing ENTER, the ESI computes
the amount of gain change necessary to achieve normalization or 0 dB
headroom.
5. Select the desired boost or cut with the Data Entry Control and
press ENTER. The amount of boost or cut is variable from -96 dB
to +96 dB in 1 dB steps.
GAIN CHANGE
Amount: +00dB
+04dB = Normalize
6. Move the cursor to the parameter(s) to be adjusted, select the
desired value(s) with the Data Entry Control and press ENTER.
The sample will be tapered between the selected start and end points
with the type of curve selected.
FADE secs samples
Size: 0.00 000000
Type: Linear
• Size: sets the size of the crossfade between no gain change and gain
change. This is variable from 0 to 1/2 the sample size.
• Type: selects the type of gain curve: Linear, Exp 1, Exp 2, Exp 3.
7. If you are not satisfied with the resulting gain change, or want
to compare before and after, proceed to Digital Processing,
Undo (9).
✱
Tip: Boosting the gain more than the
amount specified in Normalize will result in
clipping which may or may not be audible.
Use the Normalize display as a headroom
indicator to limit the maximum amount of
gain.
Gain Change Attenuation Curves
Exp 1
Exp 2
Exp 3
Linear
Gain Change Gain Curves
Exp 1
Exp 2
Exp 3
Linear